Toyota 1KZ-TE Repair Manual

B09323
B09324
SST
--LUBRICATION OIL AND FILTER
LU --3
(d) Tighten the oil filter by hand until the rubber gasket con-
tacts the seat of the filter mounting.
(e) Using SST, give it an additional 3/4 turn to seat the filter.
SST 09228 -- 10002
3 . FI LL WI TH E NG I NE O I L
(a) Clean and install the oil drain plug with a new gasket.
Torque: 34 N∙m (350 kgf∙cm, 25 ft∙lbf)
(b) Fill with fresh engine oil.
Capacity:
Drain and refill w/ Oil filter change
w/o Oil filter change
7.0 liters (7.4 US qts, 6.2 lmp. qts)
6.4 liters (6.8 US qts, 5.6 lmp. qts)
Dry fill 7.5 liters (7.9 US qts, 6.6 lmp. qts)
(c) Reinstall the oil filter cap.
4 . S TART E NG I NE AND CHE CK FO R O I L LE AKS
5. RECHECK ENGINE OIL LEVEL
CLICK HERE TO VIEW CHAPTER INDEX
Pages From Manual
TO MODEL INDEX
1KZ-TE

Toyota 1KZ-TE Specifications

General

Displacement	2982 cc
Bore x Stroke	96.0 mm x 103.0 mm
Compression Ratio	21.2:1
Fuel Type	Diesel
Fuel System	Direct Injection
Number of Cylinders	4
Valvetrain	SOHC, 2 valves per cylinder
Turbocharger	Yes
Intercooler	Yes
Engine Type	Inline-4, Turbocharged