ST0BO-- 02
P04699
ST0096
N00562
P05018
ST--16
--STARTING STARTER
RE AS S E M BLY
HINT:
Use high--temperature grease to lubricate the bearings and
gears when assembling the starter.
1 . P L ACE ARMAT URE I NTO FI E L D F RAME
(a) Apply a grease to the armature bearings.
(b) Using a press, press the armature into the field frame.
2 . I NS TALL BRUS H HO L DE R
(a) Align the claw of the brush holder with the claw groove of
the field frame.
(b) Place the brush holder on the field frame.
(c) Using a screwdriver, hold the brush spring back, and con-
nect the brush into the brush holder. Contact the 4
brushes.
NOTICE:
Check that the positive (+) lead wires are not grounded.
3 . I NS E RT S TE E L BALL I NTO CLUTCH S HAFT HO L E
(a) Apply grease to the steel ball.
(b) Insert the steel ball into the clutch shaft hole.
4. INSTALL STARTER HOUSING, CLUTCH ASSEMBLY
AND G E ARS
(a) Apply grease to the return spring.
(b) Insert the return spring into the magnetic switch hole.
CLICK HERE TO VIEW CHAPTER INDEX
Pages From Manual
CONTINUED
TO MODEL INDEX
1KZ-TE
To Next Page
Loading...
Need help?
General
