TP-Link Auranet EAP115-Wall User Manual

1
Chapter 1 Introduction
Auranet series products provide wireless coverage solutions for small-medium
business. They can either work independently as standalone APs or be centrally
managed by the EAP Controller software, providing a flexible, richly-functional but
easily-configured enterprise-grade wireless network for small and medium business.
“Celling lamp” appearance and easily mounting design with chassis make the EAP easy
to be installed on a wall or ceiling and blend in with most interior decorations.
With two built-in omnidirectional antennas, EAP115-Wall operates at 2.4GHz, and apply
802.11 standards and 2*2MIMO technology, allowing packet transmission at up to
300Mbps.
EAP115-Wall can only be powered via a PSE* device.
*PSE: Power Sourcing Equipment, a device (switch or hub for instance) that will provide
power in a PoE setup

TP-Link Auranet EAP115-Wall Specifications

General

Frequency	2.4GHz
Signal Rate	Up to 300Mbps
Button	Reset Button
Certifications	CE, FCC, RoHS
Operating Temperature	0°C to 40°C (32°F to 104°F)
Wireless Standards	IEEE 802.11b/g/n
Power Supply	802.3af PoE
Interface	1 x 10/100 Mbps Ethernet Port (RJ45)
Wireless Functions	Multiple SSIDs
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK
Management	SNMP, Web-based Management, Centralized Management
Operating Humidity	10% to 90% non-condensing
Antenna Type	Internal Antenna
Dimensions	86.8 x 86.8 x 30.2 mm