TP-Link TL-WA5210G User Manual

2
Chapter 1 Product Overview
Thank you for choosing TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE
1.1 Overview of the Product
The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE is dedicated to Outdoor wireless
network solutions. The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE will allow you to
connect your network with other wireless devices wirelessly, sharing Internet Access, files and fun,
easily and securely. The high power design will also help you build a more stable link or cover
more area outdoors.
The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE provides 3 operation modes for
multi-user to access the Internet: AP client router, AP router and AP. In AP client router mode, it
works as a WISP CPE and can access the Internet wirelessly via your WISP. In AP router mode, it
can access the Internet via an ADSL/Cable Modem, while sharing data wirelessly. In AP mode it
can work in various modes, such as Access Point/Client/WDS Bridge/Repeater.
With the most attentive wireless security, the TL-WA5210G 2.4GHz High Power Wireless Outdoor
CPE provides multiple protection measures. It can be set to turn off wireless network name (SSID)
broadcast so that only stations that have the SSID can be connected. The AP provides wireless
LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK
authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for
sensitive data secure transmission.
The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE complies with the IEEE 802.11g
and IEEE 802.11b standards so that the data transmission rate is up to 54Mbps. The wireless
transmission range can extend up to tens of kilometers.
1.2 Features
¾ Complies with IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u standards.
¾ Wireless Data transfer rates up to 54Mbps.
¾ Supports AP Client Router, AP Router and AP operation mode.
¾ High output transmit power and receive sensitivity optimized.
¾ Supports Client Router Mode for WISP CPE
¾ Supports passive power over Ethernet.
¾ Supports Wireless Distribution System (WDS).
¾ ACK timeout adjustment for long range transmission, up to 50km.
¾ Supports Antenna Alignment.
¾ Provides throughput monitor indicating the current wireless throughput.
¾ Supports Layer 2 User Isolation.
¾ Supports Ping Watch Dog.
¾ Supports link speed test.
¾ Supports Remote Management
¾ Output transmit power adjustable.
¾ Supports PPPoE, Dynamic IP, Static IP Internet Access.

TP-Link TL-WA5210G Specifications

General

2.4 GHz	Yes
Modulation	DBPSK, DSSS, OFDM, QPSK
Frequency band	2.4 - 2.4835 GHz
Receiver sensitivity	802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm, 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-98dBm
Maximum data transfer rate	54 Mbit/s
Networking features	Fast Ethernet
Vertical beam width	60 °
Transmit power range	20/27 dBm dBmW
Horizontal beam width	30 °
Maximum operating distance	50000 m
Compliance industry standards	IEEE 802.11g, IEEE 802.11b
Supported data transfer rates	54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps
Antenna connector type	RP-SMA
Antenna gain level (max)	12 dBi
Internal	No
Ethernet LAN (RJ-45) ports	1
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA-AES, WPA-PSK, WPA2, WPA2-PSK
Power requirements	12VDC / 1.0A
Operating temperature (T-T)	-30 - 70 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	265 x 120 x 83 mm