TP-Link TL-WA5210G User Manual

67
Chapter 5 AP Operation Mode
This Chapter describes how to configure some advanced settings for your Access Point through
the web-based management page in AP operation mode.
5.1 Login
After your successful login, you can configure and manage the Access Point. There are night
main menus on the left of the Web-based management page. Submenus will be available after
you click one of the main menus. The night main menus are: Status, Quick Setup, Operation
Mode, Network, Wireless, DHCP, Wireless Settings, SNMP and System Tools. On the right of
the Web-based management page, there are the detailed explanations and instructions for the
corresponding page. To apply any settings you have altered on the page, please click Save.
The detailed explanations for each Web page key’s function are listed below.
5.2 Status
Selecting Status will enable you to view the AP’s current status and configuration, all of which is
read-only

TP-Link TL-WA5210G Specifications

General

2.4 GHz	Yes
Modulation	DBPSK, DSSS, OFDM, QPSK
Frequency band	2.4 - 2.4835 GHz
Receiver sensitivity	802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm, 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-98dBm
Maximum data transfer rate	54 Mbit/s
Networking features	Fast Ethernet
Vertical beam width	60 °
Transmit power range	20/27 dBm dBmW
Horizontal beam width	30 °
Maximum operating distance	50000 m
Compliance industry standards	IEEE 802.11g, IEEE 802.11b
Supported data transfer rates	54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps
Antenna connector type	RP-SMA
Antenna gain level (max)	12 dBi
Internal	No
Ethernet LAN (RJ-45) ports	1
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA-AES, WPA-PSK, WPA2, WPA2-PSK
Power requirements	12VDC / 1.0A
Operating temperature (T-T)	-30 - 70 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	265 x 120 x 83 mm