Triumph Daytona 955i Handbook

65
Maintenance and Adjustment
Cooling System
To ensure efficient
engine cooling,
check the coolant
level each day
before riding the
motorcycle, and top up the coolant if
the level is low.
Corrosion Inhibitors
To protect the cooling system from
corrosion, the use of corrosion
inhibitor chemicals in the coolant is
essential.
If coolant containing a corrosion
inhibitor is not used, the cooling
system will accumulate rust and
scale in the water jacket and
radiator. This will block the coolant
passages, and considerably reduce
the efficiency of the cooling system.
Coolant Level Inspection
1Expansion tank
2Tank Cap
3 MAX mark
4 MIN mark
Position the motorcycle on level
ground and in an upright position.
Remove the seat(s).
Warning
Use coolant mixture containing
corrosion inhibitors and anti-freeze
suitable for aluminium engines and
radiators. Always use the anti-
freeze in accordance with the
instructions of the manufacturer.
Coolant mixture that contains anti-
freeze and corrosion inhibitors
contains toxic chemicals that are
harmful to the human body. Never
swallow anti-freeze or any of the
motorcycle coolant.
1
2
3
4
ccqf
1
2
3
4
Daytona Speed Triple

Triumph Daytona 955i Specifications

General

Displacement	955 cc
Bore x Stroke	79 x 65 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Transmission	6-speed
Rear Brakes	Single 220 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	190/50 ZR17
Width	720 mm (28.3 in)
Seat Height	815 mm (32.1 in)
Engine Type	Liquid-cooled, inline 3-cylinder
Max Torque	100 Nm (74 lb-ft) @ 8, 200 rpm
Final Drive	Chain
Frame	Aluminum beam
Front Suspension	43 mm inverted telescopic fork, adjustable
Rear Suspension	Monoshock, adjustable
Front Brakes	Twin 320 mm discs, 4-piston calipers
Fuel Capacity	21 litres (5.5 US gallons)