Triumph Daytona 955i Handbook

95
Maintenance and Adjustment
Fuse Identification – Speed
Triple
The fuse identification numbers
listed correspond with those printed
on the fuse box cover.
Headlights
Headlights – Daytona 955i
Circuit Protected Position Rating
(Amps)
Instruments, fuel pump relay,
EMS relay, starter relay
110
Ignition switch 2 30
Indicators, brake light, horn 3 10
Alarm, diagnostic connector,
instruments
410
Blank 5
Engine management system 6 20
Cooling fan 7 15
Dip and main beam headlights,
starter solenoid
820
Tail light, number plate light,
sidelights
95
Blank 10 30
Main fuse 11 30
Warning
Adjust road speed to suit the
visibility and weather conditions in
which the motorcycle is being
operated.
Ensure that the beams are
adjusted to illuminate the road
surface sufficiently far ahead
without dazzling oncoming traffic.
An incorrectly adjusted headlight
may impair visibility causing an
accident.
Warning
Never attempt to adjust a
headlamp beam when the
motorcycle is in motion.
Any attempt to adjust a headlamp
beam when the motorcycle is in
motion may result in loss of
control and an accident.

Triumph Daytona 955i Specifications

General

Displacement	955 cc
Bore x Stroke	79 x 65 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Transmission	6-speed
Rear Brakes	Single 220 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	190/50 ZR17
Width	720 mm (28.3 in)
Seat Height	815 mm (32.1 in)
Engine Type	Liquid-cooled, inline 3-cylinder
Max Torque	100 Nm (74 lb-ft) @ 8, 200 rpm
Final Drive	Chain
Frame	Aluminum beam
Front Suspension	43 mm inverted telescopic fork, adjustable
Rear Suspension	Monoshock, adjustable
Front Brakes	Twin 320 mm discs, 4-piston calipers
Fuel Capacity	21 litres (5.5 US gallons)