Universal Robots UR3e User Manual

Looping an
Expression
When looping using an expression as end condition, PolyScope provides an option for
continuously evaluating that expression, so that the “loop” can be interrupted anytime
during its execution, rather than just after each iteration.
19.8.2. SubProgram
Description A SubProgram can hold program parts that are needed several places. A SubProgram
can be a separate file on the disk, and can also be hidden to protect against accidental
changes to the SubProgram.
User Manual 239 UR10e
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR3e Specifications

General

Brand	Universal Robots
Model	UR3e
Category	Robotics
Language	English