DS1039-035A 32 LBT8599
6.1.2
6.1.26.1.2
6.1.2 A
AA
A
DDRESS BOOK
DDRESS BOOKDDRESS BOOK
DDRESS BOOK
As already mentioned in chapter “Call to a User with the Address Book ” on page 22, it is possible to call
a user by selecting the code from a list. To display the list, press the button or select the command
“Address book – Person” in “View” menu.
Figure 23: Address book
To find a user, write the name in the white area on the top left, or scroll the list in the centre of the
window. In multi-server systems, before scrolling the list or enter the name to be searched, select the
server from the list on the left side of the display.
After selecting the code, press the button to send the call.
Besides the button , used to send calls, at the bottom of the window there are the button
, used to open the window and send voice messages (see paragraph “Voicemail” on page 49)
and the button , used to close the window and go back to switchboard default operating mode.
The fourth button allows to open the list of system apartment codes.
Figure 24: Address book – Apartment displaying mode
The same window can be opened from the “View” menu with the command “Address book –
Apartment”.
To Next Page
Loading...
Need help?
General
