DS1039-035A 46 LBT8599
Press the button to see images and establish a bidirectional audio communication with the
camera module, or the button to display images and hear sounds coming from the camera
module, without establishing a communication
13
.
Warning: In the first case, the camera leds will turn on, in the second case they will stay off to
keep audio-video control secret.
Note: “Switchboard” software allows to display at the same time also the images coming
from a second camera. In this case, the active camera will show at the bottom right
the image captured by the switchboard Webcam (if present).
Captured images will be displayed on the switchboard main screen, in video images area (6); the
following message will appear in call data area (3):
To stop image displaying, press the button .
Press the button to close the window and go back to switchboard default operating mode.
6.2.7
6.2.76.2.7
6.2.7 T
TT
T
EXT MESSAGE
EXT MESSAGEEXT MESSAGE
EXT MESSAGE
Select the menu item “Text Message” to define text message and send them to system users. The
following window will appear:
Figure 40: Text Message setting
13
Mono or bidirectional audio channel is not available if cameras are connected to video servers 1039/69
To Next Page
Loading...
Need help?
General
