DS1039-035A 43 LBT8599
If “NIGHT” or “STANDBY” have been selected and the competence area must be transferred, click on
the item “Select a Switchboard”, then select the destination switchboard for calls.
Confirm by pressing the button , or the button to continue without closing
the window, or leave the operation by pressing the button .
Press the button to display information about switchboard competence area. The
following window will appear:
Figure 35: Concierge Service Configuration – Competence area details
If the switchboard manages more than one IPervoice server, select the serverfrom the respective list to
check its competence information.
6.2.3
6.2.36.2.3
6.2.3 L
LL
L
IFT INTERFACE COMMAN
IFT INTERFACE COMMANIFT INTERFACE COMMAN
IFT INTERFACE COMMANDS
DSDS
DS
If one or more lift interfaces (1039/37) are installed in IPervoice system, lifts can be enabled in order to
allow the user to reach only the desired floor or apartment (according to lift interfaces management
mode for the specific stair). To enable the lift, access this menu; on the left boxes define block, stair and
floor codes of the apartment that the user wants to reach. On the right box, define the time during
which the lift will be enabled.
Warning: If the switchboard has been configured to manage more than one IPervoice server, to
enable lifts select the server from the pull-down menu on the upper side of the
window, as shown in Figure 36.
To Next Page
Loading...
Need help?
General
