urmet domus IPERVOICE SYSTEM User Manual

DS1039-035A 51 LBT8599
6.2.9
6.2.96.2.9
6.2.9 C
CC
C ALL
ALL ALL
ALL D
DD
D IVERT
IVERT IVERT
IVERT C
CC
C ONFIG
ONFIGONFIG
ONFIG
This function allows to activate the call divert; the calls addressed to the switchboard will be redirected
to a VoIP telephone in the system.
Figure 42: Call divert configuration
To configure the call divert, select the menu item “Call Divert Config” to open the window and then
perform the following operations:
 In the pull-down menu in the upper side of the window select the server of the device to which the
call must be diverted;
 Enter the user number to which all the calls addressed to the switchboard must be redirected;
 Otherwise, press the button to see the list of the available VoIP telephones;
 Select the desired telephone;
 Press the button to activate the diversion and close the window
 To disable the call divert, open again the configuration window and press the button .
 Warning: “Call Divert Config” feature is not available for multi-server plants.

urmet domus IPERVOICE SYSTEM Specifications

General

Brand	urmet domus
Model	IPERVOICE SYSTEM
Category	Intercom System
Language	English