156
Maintenance and service
Courtesy lighting
There is courtesy lighting under the
dashboard on the driver and passenger
sides.
1. Insert a screwdriver and gently turn so
that the lens detaches.
2. Remove the faulty bulb.
3. Install the new bulb.
4. Reinstall the lens.
Replacing inner bulbs
Cargo compartment
1. Insert a screwdriver and gently turn so
that the lamp housing loosens.
2. Remove the faulty bulb.
3. Install the new bulb.
4. Reinstall the lamp housing.
Vanity mirror lighting
Removing mirror glass:
1. Insert a screwdriver underneath the
lower edge, in the centre. Carefully pry
up the lug on the edge.
2. Insert the screwdriver underneath the
edge on the left and right-hand side (by
the black rubber sections). Carefully pry
up so that the lower edge of the glass
releases.
3. Carefully detach and lift out the entire
mirror glass and cover
4. Remove the blown bulb and replace it
with a new one.