184
Infotainment
Switch
When the telephone system is active or in
standby mode, a handset is shown in the
display.
If the car’s ignition is switched off while the
telephone system is on, the system will be on
the next time the ignition is switched on. No
calls can be received when the telephone
system is switched off.
Activate:
1. Press PHONE to start the telephone
system.
2. Enter the PIN code and press ENTER.
Switch off:
• Hold PHONE in to switch off the
telephone system.
Standby:
• Press PHONE or EXIT to keep the
telephone system in standby mode.
• Press PHONE briefly to reactivate the
system.
NOTE! With the audio model Performance,
it is not possible to listen to the radio, CD, MD
or receive traffic messages during a
telephone call.
Volume reduction during a
telephone call
If the telephone rings when the radio is
switched on, the volume is lowered when the
call is answered. When the call is concluded,
the volume returns to the previously set level.
It is possible to adjust radio volume when the
telephone is engaged in order to maintain the
new volume level when the call is ended. The
audio volume can be switched off completely
during a telephone call. See menu 5.5.3.
This function only applies to the Volvo
integrated telephone system.
Standby mode
Calls can be received while the audio system
is active and information from the audio
system sources is shown in the display. The
telephone must be in active mode to use the
other functions of the telephone system.
Menu shortcuts
In the menu system, you can use numbers
instead of the arrows and ENTER to select
the right menu on the main menu level. Each
menu selection is numbered. The numbers
are shown in the display together with the
menu alternative.
Traffic safety
For reasons of safety, the menu system
cannot be accessed at speeds in excess of 8
km/h (5 mph). Only activities started in the
menu system can be completed. The speed
limiter can be disconnected using menu
function 5.6 1 Menu lock.
IDIS
(Intelligent Driver Information System) The
IDIS system allows the priority of incoming
telephone calls and SMS messages to be
reduced so that the driver can concentrate on
driving. Incoming calls and SMS messages
can be delayed for 5 seconds before they are
connected. Missed calls are shown in the
display. IDIS can be disconnected using
menu function 5.6.2
Making and receiving calls
To call:
• Dial the number and press ENTER on
the steering wheel or the control panel
keypads or lift the handset.
To receive a call:
• Press ENTER (or lift the handset).
Automatic Answer can also be used.
See menu function 4.3.
The car audio system can be muted
automatically while a telephone conversation
is in progress. See menu alternative 5.5.3.
Ending a call
Press EXIT on the steering wheel or control
panel keypad or hang up the handset. The
audio system resumes its previous activity.
Reject an incoming call by pressing EXIT.
To Next Page
Loading...
Need help?
General
