185
Infotainment
Privacy handset (option)
Making a call using the handset:
1. Select the desired telephone number
using the centre console keypad and lift
the handset to make the call. Press the
handset down before lifting.
2. The call is cancelled when the handset is
replaced in the holder.
Adjust the volume using the dial on the side
of the handset.
To switch to handsfree without ending the
call:
• Press the right arrow on the steering
wheel keypad (or the menu buttons in
the control panel) and select Handsfree.
Press ENTER and replace the handset
in its cradle. If the handset is already
removed from its cradle, the other party
will be audible in the handsfree system.
Press the MENU button, scroll to
Handset and press ENTER in order to
transfer to the handset.
Last dialled number
The telephone automatically stores the last
telephone numbers/names dialled.
Calling the last dialled number:
1. Press ENTER on the keypad on the
steering wheel or control panel (when in
active mode).
2. Use the menu buttons to scroll forward
or back through the last numbers dialled.
These are shown in the display.
3. Press ENTER.
Speed dialling
A number stored in the phone book can be
linked to a speed dial button
(1-9).
1. Select Phone book from the menu and
press ENTER
2. Scroll to speed dial, menu 3.4, and press
ENTER.
3. Select which number is to be the speed
dial number. Press ENTER to confirm.
4. Search for the desired name or
telephone number in the phone book.
Press ENTER to select.
Hold in the desired speed dial button for
approximately two seconds to make the call
or press the number briefly followed by
ENTER.
NOTE! When the telephone is switched on,
it takes a while before speed dialling is
available. Menu 3.4.1 must be activated to
use a speed dial number
Call waiting
A two-tone signal during a telephone call
indicates that there is another incoming call.
The display shows: Answer?
To receive a call:
1. Press ENTER. Your current call will be
put in hold mode.
2. Select Hold/Resume to finish the call
and return to a call on hold.
To reject necessary call: Press EXIT.
Exit the current call: Press EXIT. The function
can be de-selected in the menu.
Functions during a call
Several functions are available during a call.
To Next Page
Loading...
Need help?
General
