17
EPG-SPRINT XE
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2354913
4.4 SAFETY FEATURE IDENTIFICATION
Plates bearing information for the user have been attached to the work openings of the
powder coating booth.
The plate size corresponds to the standard category
100 mm; 3.94 inches.
The label plates, which must be attached, are shown below:
High voltage!
In the control cabinet:
(25 mm; 0.98 inches)
Voltage before main switch
Forbidden for unauthorized
persons!
Explosive atmosphere!
Forbidden for persons
with a cardiac pacemaker!
Follow the instructions in the
operating manual!
Smoking, re, and open
ames are prohibited!
Wear electrostatically
conductive footwear!
Danger of crushing!
Risk of tripping!
Do not jump on the
booth oor!
Danger of slipping!
To Next Page
Loading...
Need help?
General
