WAGNER EPG-SPRINT XE User Manual

33
EPG-SPRINT XE
P_01120
1
2
3
6
7
5
4
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2354913
6.6.1 GROUNDING THE POWDER COATING SYSTEM
1 Only use mains cables with grounding strand!
2 Connect grounding cable with booth and signal ground!
3 Connect grounding cable to an uncoated metal part of the booth!
4 Remove all paint from hooks and other hanger parts!
5 Do not wear non-conducting gloves!
6 Wear electrostatically conductive footwear!
7 The oor must be electrostatically conductive!
Sparks between conveyor, conveyor hooks (hangers) and work piece can occur
if electric contact points between conveyor, conveyor hooks (hangers) and work
piece are not suciently cleaned and therefore the work pieces are not suciently
grounded!
These sparks can cause heavy radio frequency interference (EMC).

WAGNER EPG-SPRINT XE Specifications

General

Brand	WAGNER
Model	EPG-SPRINT XE
Category	Paint Sprayer
Language	English