18
EPG-SPRINT XE
OPERATING MANUAL
VERSION 09/2017 ORDER NUMBER DOC2354913
5 DESCRIPTION
5.1 AREAS OF APPLICATION
The EPG-SPRINT XE control unit can be used as a stand-alone unit in manual coating
systems or with an automatic coating system.
– When a Corona gun is connected, Corona current scale and the high-voltage supply
and control unit are active.
– When a Tribo gun is connected, the Tribo current scale is activated, while the high-
voltage supply and control unit are deactivated.
The control unit recognizes if a manual or automatic spray gun is connected. If an automatic
gun is connected, then the control unit can only be controlled via the remote interface.
Incorrect use!
Risk of injury and damage to the device.
Only connect original WAGNER spray guns to the EPG-SPRINT XE
control unit.
The PEM-C3R and PEM-T3R manual spray guns cannot be
connected to the EPG-SPRINT XE control unit.
WARNING
To Next Page
Loading...
Need help?
General
