Webasto BlueCool S Series User Manual

BlueCool S Series 6 Electrical Connections
21
To activate the remote control, Parameter 1 from the
chapter 10.2.1, Table 4 must be activated in the system
programming.
The parameter shows the display "1.x" on the digital
display. The parameter is to have the value 1 for the
activated remote control.
6.5.2 PC diagnosis
PC diagnostic software is available for the BlueCool S Series.
Please see the corresponding documentation for additional
information on this subject.
Fig. 13 Infrared remote control

Webasto BlueCool S Series Specifications

General

Brand	Webasto
Model	BlueCool S Series
Category	Air Conditioner
Language	English