Webasto BlueCool S Series User Manual

10 Overview of Programming Functions BlueCool S Series
36
10.3 Explanation of parameters
10.3.1 Operating level
Parameter b: Fan speed
Setting range: 1, 2, 3, 4, 5, A
Factory setting: A
This parameter is used to manually set the fan speed in
operation or to activate the automatic fan setting.
1 = Fan speed “1”
2 = Fan speed “2”
3 = Fan speed “3”
4 = Fan speed “4”
5 = Fan speed “5”
A = Automatic
Parameter E: Evaporator temperature
Display value of current evaporator temperature in °C or °F.
Display value only
10.3.2 Setting level 1
Parameter F: Operating mode
Setting range: 01, 02, 03, 07
Factory setting: 03
The operating mode specifies whether the system only
cools, or heats or automatically switches between the two
operating modes. In addition, the dehumidification mode of
the system can be activated.
01 = cooling only
02 = heating only (reverse heating operation)
03 = automatic switching between cooling and heating
(reverse heating operation)
07 = dehumidification (dehumidification of cabin air by
cooling or heating)
Parameter U: Operating voltage
Display value of current operating voltage in V.
Parameter Fd: Number of dehumidification cycles in
24 hours in operating mode F07
Setting range: 01 to 03
Factory setting: 01
This parameter is used to set the number of dehumidifying
cycles when the dehumidification mode (F07) in Parameter
F is activated. The duration of the individual cycles is defined
with the parameter hd or cd.
00 = dehumidification mode deactivated
01 = 1 cycle every 24 hours
02 = 1 cycle every 12 hours
03 = 1 cycle every 8 hours
Parameter hd: Heating time in dehumidification cycle
in operating mode F07
Setting range: 01 to 99
Factory setting: 01
This parameter is used to set the heating time in minutes in
a dehumidification cycle when the dehumidification mode
(F07) in Parameter F is activated.
For example 10 = 10 minutes
Parameter cd: Cooling time in dehumidification cycle
in operating mode F07
Setting range: 01 to 99
Factory setting: 01
This parameter is used to set the cooling time in minutes
during a dehumidification cycle when the dehumidification
mode (F07) in Parameter F is activated.
For example 10 = 10 minutes

Webasto BlueCool S Series Specifications

General

Brand	Webasto
Model	BlueCool S Series
Category	Air Conditioner
Language	English