Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
172
Values:
Dial Type
Purpose: To select the dialing type.
Values:
Prefix Dial
Purpose: To select whether to set a prefix dial number.
Values:
Fax Cover Page
Purpose: To set whether to attach a cover page to faxes.
Values:
Number of Redial 3 Sets the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the
device will not redial. The value is set in increments of
1.
0–9
Redial Interval 1 Sets the interval between redial attempts. The value is
set in increments of 1 minute.
1–15
Interval Timer 8 Sets the interval between re-send attempts. The value
is set in increments of 1 second.
3–255
PB Uses tone dialing.
DP (10PPS) Sets DP (10PPS) (Dial Pulse, 10 Pulse Per Second) as the dial type.
DP (20PPS) Sets DP (20PPS) (Dial Pulse, 20 Pulse Per Second) as the dial type.
Off - Does not set a prefix dial number.
On - Sets a prefix dial number.
Prefix Dial Number Sets a prefix dial number of up to five digits. This
number dials before any auto dial number is started. It
is useful for accessing the Private Automatic Branch
Exchange (PABX).
Off Does not attach a cover page to faxes.
On Attaches a cover page to faxes.