Copy
Xerox
®
DocuCentre
®
SC2020
User Guide
86
2. Select the desired setting, and then select [OK].
Note: Bold values are the factory default menu settings.
Saturation
To adjust the amount of colors of the copy to make the colors darker or lighter than the original.
1. Select the [Quality] tab, and then select [Saturation].
2. Select the desired setting, and then select [OK].
Note: Bold values are the factory default menu settings.
Sharpen Makes the copy image sharper than the original.
Normal The color clarity of the image is the same as the
original.
Soften Makes the copy image softer than the original.
Vivid Makes the copy image sharper than the original.
Normal The color clarity of the image is the same as the
original.