Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
182
Values:
Banner Sheet
Note: Banner Sheet feature is available only when the One Tray Module (optional) is installed on the
device.
Purpose: To specify the position of banner sheet, and also specify the tray in which the banner sheet is
loaded.
Values:
Substitute Tray
Purpose: Specifies whether to use paper of a different size when the paper that is loaded in the specified
tray does not match the paper size settings for the current job.
Values:
Letterhead 2-Sided
Purpose: To specify whether to print on both sides when using letterhead.
Off Does not print the received data.
On Prints the received data as text data.
Insert Position Off Does not print the banner sheet.
Front Inserted before the first page of every copy.
Back Inserted after the last page of every copy.
Front & Back Inserted before the first page of every copy and after
the last page of every copy.
Specify Tray Tray5 (Bypass) The banner sheet is loaded in the Tray 5 (bypass).
Tray1 The banner sheet is loaded in Tray 1.
Tray2 The banner sheet is loaded in Tray 2.
Off No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger paper size,
the device substitutes paper of nearest size.
Nearest Size Substitutes paper of nearest size.
Use Tray5 (Bypass) Substitutes paper from Tray5 (Bypass).