Configuring the Printer Using CentreWare Internet Services 27
Setting Up a Web Browser
When using CentreWare Internet Services, we
recommend you specify the address of the printer
without using a proxy server.
Note
• If you access CentreWare Internet Services using a
proxy server, the response from the service may be
slow or the service may not be displayed.
• For information on how to set up your web browser,
refer to the online help for the web browser.
If you want to change the display language of
CentreWare Internet Services, change the display
language of your web browser.
Note
• For information on how to change the display language
of your web browser, refer the online help for the web
browser.
Also, if CentreWare Internet Services does not
operate properly, use the following steps to
configure your web browser.
The procedure uses Internet Explorer 6.0 as an
example.
1. From the [Tools] menu, select [Internet
Options].
2. On the [General] tab, click [Settings] under
[Temporary Internet Files].
3. Under [Check for newer versions of stored
pages:] on the [Settings] dialog box, select
either [Every visit to the page] or [Every time
you start Internet Explorer].
4. Click [OK].
5. Click [OK] on the [Internet Options] dialog
box.
Setting Up the Printer
To use CentreWare Internet Services, you must
configure the printer’s IP address and enable
[InternetServices] (default: [Enabled]). If
[InternetServices] is set to [Disabled], change it to
[Enabled] on the control panel.
To Next Page
Loading...
Need help?
General