Options 81
AAppendix
Options
The following table lists the main accessories available for the printer. To purchase them, contact the dealer
where you purchased the printer.
Product Name
Product
Code
Description
Hard Disk Unit EL300704 For functions that require a hard disk, refer to “Installing the
Hard Disk” (P. 86).
Memory 256MB EL300705 Increases the printer's memory capacity.
For information about the features and situations that
require additional memory, refer to “Installing Additional
Memory” (P. 83).
Memory 512MB EL300706
Memory 1024MB EL300707
Parallel Port EL300703 Required to use the parallel interface.
Single Tray Module EL300697 Paper tray for loading up to 560 sheets of plain paper (Fuji
Xerox P paper). Installs directly under the printer unit.
3 Tray Module EL300696 Three paper trays for loading up to 560 sheets of plain
paper (Fuji Xerox P paper). Installs directly under the printer
unit.
Duplex unit EL300698 Required for 2-sided printing.
Korea Font ROM EL300711 Korea Fonts (Myungjo, Gothic, Round Gothic, Graphic,
Kungso, Saemul) can be used for printing. KS/KSSM/
KS5895 emulation also can be used.
The Korea Font ROM and Feature Enhance Kit cannot be
installed at the same time.
TC/SC Font ROM EL300710 Chinese Fonts (ShuSong, KaiTi, HeiTi, FangSong) can be
used for printing.
The TC/SC Font ROM and Feature Enhance Kit cannot be
installed at the same time.
Feature Enhance Kit EL300701 Required to use the following features.
• Image log
• Watermark
• Network accounting feature
Additional memory and the hard disk is required to use the
Feature Enhance Kit.
The Feature Enhance Kit, TC/SC Font ROM and Korea
Font ROM cannot be installed at the same time.
Cabinet EL300699 The printer unit can be placed on the Cabinet.
Castor Base EL300700 The printer can be placed on the Castor Base.
• Product names and codes are current as of March 2008.
• Product names and codes are subject to change.
• For the latest information about optional accessories, contact our Customer Support Center or your dealer.