Xerox Phaser 3330 Service Manual

Service Parts Disassembly
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
4-52
Thermistor Assembly
Parts List 3.3 Fuser
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section (page 4-3).
2. Undock the printer from the optional Tray 2 Base. (page 4-8).
3. Remove the Fuser (page 4-52).
4. Remove 3 screws (silver, flanged, tap, 10 mm) and release the Thermistor harness from the
harness guides to remove the Thermistor Assembly (Parts List 3.3 Fuser, PL 3.3.2).
s3320-214

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English