Xerox WorkCentre 3315DN System Administrator Guide

IP Filtering
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
129
IP Filtering
Overview
The IP Filtering is a security feature that allows you to control access to Internet Services. IP Filtering
allows you to prevent unauthorized access by IP (Internet Protocol).
The IP Filtering feature provides security to the machine, by allowing you to register the IP addresses
permitted to communicate with the machine. This feature is used to prevent Raw TCP/IP Printing,
LPR/LPD, HTTP, Fax to PC, IPP, SNMP and Scan Manager for Network from unauthorized users
Enable IP Filtering
1. At your Workstation, open the web browser, enter the IP Address of the machine into the Address
bar.
2. Press Enter.
3. Click on the Properties icon.
4. If prompted, enter the Administrator User ID admin and Password 1111, and click on Login.
5. Click on the Security link.
6. Click on the Network Security link.
For IPv4 Filtering
1. Select IPv4 Filtering.
2. Checkmark the IPv4 Filtering Enable box.
3. Enter the IP Address(es) to permit access to the device in the following IP Address table.
4. Enter in the IP address or a IP address range by using an asterisk (*) as a wild-card character, for
example:
192.246.238.* is used to reference a subnet of host address
192.246.* is used to reference a wider subnet of host address
192.* is used to reference the widest subnet of host address
5. The ability to filter on a port or ports is also supported. Enter the port information.
6. Click on the Apply button to accept changes.
7. Click on OK.
For IPv6 Filtering
1. Select IPv6 Filtering.
2. Checkmark the IPv6 Filtering Enable box.
3. Enter the IP Address(es) to permit access to the device in the following IP Address table.
4. Enter the IPv6 address in the form of a CIDR convention. Prefix indicates the number of leftmost
bits to be referenced.
For example:

Xerox WorkCentre 3315DN Specifications

General

Brand	Xerox
Model	WorkCentre 3315DN
Category	All in One Printer
Language	English