Xerox WorkCentre 3315DN System Administrator Guide

TCP/IP
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
29
DNS Configuration:
12. From the Network Settings menu, press the Up/Down arrow buttons to highlight TCP/IP(IPv4);
press OK.
13. Press the Up/Down arrow buttons to highlight Static; press OK.
14. Press the Up/Down arrow buttons to highlight Primary DNS; press OK.
15. Enter details for Primary DNS using the alphanumerical keypad; press OK. The Saved screen will
display and return to the Static menu.
16. Press the Up/Down arrow buttons to highlight Secondary DNS; press OK.
17. Enter details for Secondary DNS using the alphanumerical keypad; press OK. The Saved screen
will display and return to the Network Settings menu.
Configure Dynamic IPv4 Addressing using the Machine User Interface
Information Checklist
Before starting please ensure that the following items are available and/or the tasks have been
performed:
• Existing operational network utilizing the TCP/IP protocol.
• DHCP or BOOTP Server should be available on the network.
• Ensure that the machine is connected to the network.
Procedure
Installation via DHCP (Dynamic Host Configuration Protocol)
DHCP is enabled on the machine by default. If the machine is connected to the network, the TCP/IP
information will be configured when the machine is powered on and no further configuration is
required.
1. Print a Configuration Report to verify that the information was assigned correctly. Refer to Print
a Configuration Report on page 21.
Installation via BOOTP or DHCP
Ensure your machine is connected to the network with Ethernet cabling.
1. Press the Machine Status button on the control panel.
2. Press the Up/Down arrow buttons to highlight Network Settings; press OK.
3. Enter the Administrator Password using the alphanumerical keypad. The default is 1111. Refer to
Administrator Access on page 19.
4. Press the OK button, the Network Settings menu displays.
5. Press the Up/Down arrow buttons to highlight TCP/IP(IPv4); press OK.
6. Press the Up/Down arrow buttons to highlight DHCP; press OK.
7. The Saved screen will display and return to the Network Settings menu.

Xerox WorkCentre 3315DN Specifications

General

Brand	Xerox
Model	WorkCentre 3315DN
Category	All in One Printer
Language	English