Xerox WorkCentre 3315DN User Manual

System Setup
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
174
4. Press the up/down arrows to highlight the option required and press OK.
5. Press the up/down arrows to highlight the setting required or enter the correct information using
the keypad.
6. Press OK to save the selection.
7. Continue customizing the Paper Settings options as required, then press Stop to return to Ready
mode.
Sound/Volume
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight System Setup and press OK. If necessary, enter the
Administrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 for
instructions.
3. Press the up/down arrows to highlight Sound/Volume and press OK.
Paper Type Sets the type of paper in the tray.
•Tray 1
•Tray 2
•Plain *
•Thick
• Thin
•Recycled
•Cardstock
•Bond
•Archive
•Bypass Tray •Plain *
•Thick
• Thin
•Cotton
• Color
• Preprinted
•Recycled
• Transparency
• Labels
•Cardstock
•Bond
•Archive
•Thicker
Paper Source Sets the paper tray to be used for
Copy, Print and Fax jobs.
•Copy Tray
•Fax Tray
•Print Tray
•Tray 1
•Tray 2
•Bypass Tray
•Tray 1 / 2
•Auto *
Tray Confirm Activates the tray confirmation
message. If you open and close a tray,
a message displays asking whether to
set the paper size and type for the tray
just opened.
•Tray 1
•Tray 2
•Bypass Tray
•On / Off *
•On / Off *
•On / Off *
Option Description Settings

Xerox WorkCentre 3315DN Specifications

General

Brand	Xerox
Model	WorkCentre 3315DN
Category	All in One Printer
Language	English