To Next PageTo Next PageTo Previous PageTo Previous Page
How to resolve document feeder jams in Xerox WorkCentre 5325 All in One Printer?
Document feeder jams in your Xerox All in One Printer can occur due to: * Unsupported media. Use only Xerox-approved media. * Exceeding the document feeder's capacity. Place fewer documents in the feeder. * Improperly adjusted document feeder guides. Ensure the media guides fit snugly against the media.
What causes duplex unit jams on Xerox WorkCentre 5325?
Duplex unit jams on your Xerox All in One Printer can be caused by using unsupported media of the wrong size, thickness, or type. Use only Xerox-approved media. Also, recheck the media path inside the duplex module, remove any jammed paper, ensure you have not mixed media types in the tray, and avoid printing envelopes, labels, or extra heavyweight paper 2-sided.
What to do if paper jam message stays on Xerox WorkCentre 5325 All in One Printer?
If the paper jam message persists on your Xerox All in One Printer, it indicates that some paper remains jammed inside the printer. Recheck the media path and ensure that all jammed paper has been removed.
What to do if my Xerox WorkCentre 5325 All in One Printer does not turn on?
If your Xerox All in One Printer doesn't turn on, there are several potential causes: * The power switch may not be correctly turned on. Ensure the main power switch behind the front cover is on, and turn off the printer using the power switch on the lower center tray, wait two minutes, and then turn it back on. * The power cord might not be securely plugged into the outlet. Turn off the printer and plug the power cord securely into the outlet. * The outlet itself may have an issue. Plug another electrical appliance into the outlet to see if it operates properly. Try a different outlet. * The printer might be connected to an outlet with incorrect voltage or frequency. Use a power source with the correct specifications.
Why is printing taking so long on my Xerox WorkCentre 5325?
Several factors can cause slow printing on your Xerox All in One Printer: * The printer may be set to a slower printing mode for special media. Ensure the media type is correctly set in the print driver and at the printer control panel, as printing with special media takes more time. * The printer could be in power saving mode, which requires time to start printing. * The print job might be very complex. In this case, simply wait for the job to complete.
How to fix media misfeeds on Xerox All in One Printer?
If your Xerox All in One Printer is experiencing media misfeeds, consider the following: * Ensure the media is correctly positioned in the tray and that the media guides are properly set. * If there are too many sheets in the tray, remove the excess paper and load it below the fill line. * Adjust the media guides to match the size of the media. * If the media is warped or wrinkled, remove it, smooth it out, and reload it. If it continues to misfeed, use different media. * Replace moist media with new, dry media. * Make sure you are using Xerox-approved media. * Ensure label sheets are loaded according to the manufacturer’s instructions. * When using Tray 5 (Bypass Tray) for envelopes, load them facedown with the flaps closed, on the leading edge.
Why does my Xerox WorkCentre 5325 All in One Printer pull multiple sheets together?
Your Xerox All in One Printer might pull multiple sheets together due to: * An overfilled paper tray. Remove some paper, ensuring not to load past the fill line. * Uneven front edges of the paper. Remove the media, align the front edges, and reload. * Moist media due to humidity. Replace the media with new, dry media. * Too much static electricity. Try a new ream of paper. * Unsupported media. Use only Xerox-approved media.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed (Black) | Up to 25 ppm |
| Print Resolution | Up to 1200 x 1200 dpi |
| Standard Paper Capacity | 1, 090 sheets |
| Max Paper Capacity | 5, 090 sheets |
| Processor | 533 MHz |
| Copy Speed | Up to 25 cpm |
| Copy Resolution | Up to 600 x 600 dpi |
| Scan Resolution | Up to 600 x 600 dpi |
| Duplex Printing | Automatic |
| Paper Sizes | A4, A5 |
| Memory | 256 MB |
| Hard Drive | 80 GB |
| Connectivity | USB 2.0, Ethernet |
| Scan Destinations | Email, Network, USB |
| Fax Transmission Speed | 33.6 Kbps |
| Operating System Compatibility | Windows, macOS, Linux |
Covers electrical hazards, supply, and power cord safety precautions.
Guidelines for printer location, operation, and supply usage.
Details standard features, available configurations, and optional add-ons.
Outlines the basic steps required before using the printer.
Details how to connect the printer to power and network.
Step-by-step instructions for powering the printer on and off.
Guides on installing necessary print and scan drivers for various OS.
Explains how to access and manage the printer via a web browser.
Basic printing steps and guidelines for supported media types.
Instructions for loading various types of paper and media into printer trays.
Explains media compatibility and procedures for duplex printing.
Steps for making standard copies using the document glass or feeder.
Modifying image quality, layout, and basic copy parameters.
Adjusting color, resolution, file format, and other scan parameters.
Procedures for embedded, server, internet, and computer-based faxing.
Guidelines for general maintenance, cleaning procedures, and precautions.
Common problems and solutions, including printer not turning on.
Procedures for removing paper jams from various printer locations.
Instructions for clearing staple jams in the finishers.
