Copying
WorkCentre 5300 Series Multifunction Printer
User Guide
99
Layout Adjustments
Use the Layout Adjustment tab to change the following settings:
• Book Copying on page 99
• 2-Sided Book Copying on page 100
• Specifying the Original Size on page 100
• Erasing the Edges of a Copy on page 100
• Shifting the Image on page 101
• Rotating the Image on page 102
• Inverting the Image on page 102
• Specifying the Orientation of the Original on page 102
Book Copying
When copying a book, magazine, or other bound document, you can copy either the left or right page,
or both pages onto a single sheet of paper.
You must use the document glass to make copies from books, magazines, or other bound documents.
Do not place bound originals in the document feeder.
Notes:
• This feature and 2-Sided Book Copying on page 100 cannot be
activated simultaneously.
• Non-standard size documents will not be separated into two pages accurately.
To copy pages from a book or other bound document:
1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.
2. Touch Book Copying. In the next screen, touch On.
a. To copy both pages of an open book in page order, touch Both Pages. To specify the Binding
Edge Erase amount, the space between the image area and the binding, touch the plus or
minus (+/–) buttons.
b. To copy only the left page of an open book touch Left Page Only. To specify the Binding
Edge Erase amount, the space between the image area and the binding, touch the plus or
minus (+/–) buttons.
c. To copy only the right page of an open book, touch Right Page Only. To specify the Binding
Edge Erase amount, the space between the image area and the binding, touch the plus or
minus (+/–) buttons.
3. Touch Save.
Note: The facing pages of a bound document must be placed in a horizontal orientation on the
document glass as shown on the touch screen.
To Next Page
Loading...
Need help?
General
