Installation and Setup
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
42
8. If prompted, enter your password, then click OK.
9. Click Continue Installation.
When the driver is finished installing, click Logout to complete the installation and restart your
computer.
Installing the Scan Driver
To install the scan driver:
1. Insert the Software and Documentation disc into the appropriate drive on your computer.
Note: If the Software and Documentation disc is not available, download the latest drivers from
www.xerox.com/office/6505MFPdrivers.
2. On your desktop, double-click the WorkCentre 6505 scan icon.
3. Click WorkCentre 6505 Scan Installer.
4. If prompted, enter your password, then click OK.
5. At the Introduction installer window, click Continue.
6. Read the license agreement, click Continue, then click Agree.
7. Click Install.
When the driver is finished installing, your browser opens to an online registration form.
8. Complete the online registration, then close the browser.
9. At the Finish Up window, click Quit.
10. Next, add the printer to your printer queue. For details, see Adding the Printer on page 42.
Adding the Printer
For networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of your
printer for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.
To add the printer using Bonjour:
1. From the Applications folder or from the dock, open System Preferences.
2. Click Print & Fax.
The list of printers appears on the left of the window.
3. Click the plus (+) button under the list of printers.
4. Click the Default icon at the top of the window.
5. Select your printer from the list and click Add.
Note: If your printer was not detected, verify that the printer is on and that the Ethernet or USB
cable is connected properly.
To add the printer by specifying the IP address:
1. From the Applications folder or from the dock, open System Preferences.
2. Click Print & Fax.
The list of printers appears on the left of the window.
3. Click the plus (+) button under the list of printers.
4. Click IP.
To Next Page
Loading...
Need help?
General
