Xilinx KCU105 User Manual

KCU105 Board User Guide www.xilinx.com 12
UG917 (v1.4) September 25, 2015
Chapter 1: KCU105 Evaluation Board Features
Kintex UltraScale XCKU040-2FFVA1156E Device
[Figure 1-2, callout 1]
The KCU105 board is populated with the Kintex UltraScale XCKU040-2FFVA1156E device.
For more information on Kintex UltraScale FPGAs, see Kintex UltraScale Data Sheet: DC and
AC Switching Characteristics (DS892) [Ref 1].
37
2x8 shrouded PMBus connector J39, see
Monitoring Voltage and Current
ASSMAN AWHW16G-0202
50
38
2x7 2mm shrouded JTAG cable connector J82,
see Monitoring Voltage and Current
MOLEX 87832-1420
32
39
12V power input 2x3 connector (J15), see Power
On/Off Slide Switch SW1
MOLEX-39-30-1060
51
40
Rotary Switch,
Active-High (SW13)
PANASONIC EVQ-WK4001
41
Notes:
1. The KCU105 board schematics are available for download. See the KCU105 Evaluation Kit website.
2. The KCU105 board jumper header locations are shown in Figure A-1.
Table 1-1: KCU105 Board Component Descriptions (Cont’d)
Callout Component Description Notes
Schematic
(1)
0381556
Page Number
Send Feedback

Xilinx KCU105 Specifications

General

Brand	Xilinx
Model	KCU105
Category	Motherboard
Language	English