Xinje DS3E Series User Manual

82
5-6-4. Speed command pulse filter time
P0-16
speed command pulse filter time
Unit
Default
Range
Suitable mode
Modify
Effective
0.01ms
100
0~10000
7
Any
Immediately
When the command pulse frequency is low, setting a suitable value for this parameter can decrease the
speed fluctuation.
5-7．Torque control (analog voltage command) (only for
DS3-PQA)
Parameter
Name
Reference
P0-01
Control mode selection
5-7-1
P3-23
T-REF distribution
P3-24
The analog voltage of rated torque
5-7-2
P3-25
Analog voltage torque command filter
P3-26
Torque command input dead zone voltage
P5-20
Servo ON signal /S-ON
5-2-1
Other parameters
Key words
Parameter
Name
Reference
Zero drift
adjustment
F1-04
Torque command offset auto-adjustment
5-7-3
Filter
P3-25
Torque command filter time
5-7-4
Speed limit
P3-00
V-REF distribution
5-7-5
P3-16
Internal forward speed limit for torque control
P3-17
Internal reverse speed limit for torque control
P5-43
Speed reach limit output /VLT
/SPD-D
direction
selection
P5-27
Speed direction changing
5-5-3
5-7-1. Control mode selection
5-7-2. The analog value of rated torque
parameter
Name
Default
setting
Suitable
mode
Meaning
Change
Effective
P3-23
T-REF
distribution
0
All
T-REF input as speed
command
Servo
OFF
At once
P3-24
Analog value of rated torque
Unit
Default setting
Range
Suitable
mode
Change
Effective
Parameter
Parameter
Set
Function
Modify
Effective
P0-01
2
Torque control: analog voltage command
Servo OFF
Immediately
Function: Control the torque by the analog voltage signal input from T-REF terminal.
Direction switching: negative or positive voltage or SPD-D (P5-27).

Xinje DS3E Series Specifications

General

Brand	Xinje
Model	DS3E Series
Category	Servo Drives
Language	English