Yaesu FT-90R User Manual

26
FT-90R OPERATING MANUAL
Automatic Repeater Shift
The ARS (Automatic Repeater Shift) feature in the FT-90R allows easy and con-
venient repeater operation by automatically activating the repeater shift function
whenever you tune to a standard repeater sub-band. The ARS function is preset at
the factory to conform to the bandplans for the country to which it is exported.
The ARS function is enabled at the factory. To disable it:
Press the key, as many times as necessary, so that “ OFF ” appears on the
display.
To re-enable ARS:
Press the key, as needed, to set the display to “ ARS. ”
ARS operation is independent on the VHF and UHF channels. Therefore, you are
allowed to have ARS enabled on VHF but disabled on UHF, if you like.
Operation

Yaesu FT-90R Specifications

General

Brand	Yaesu
Model	FT-90R
Category	Transceiver
Language	English