35
Using Memory Tag
Memory name tags, such as a call sign or broadcast station name may be assigned to
the memory channels and home channels. Input a memory tag using up to 16 charac-
ters. Alphabetic characters (upper and lowercase), Numbers and Symbols may be en-
tered to the memory name tag.
1. Press the [V/M] key to enter Memory mode.
2. Rotate the DIAL knob to Recall the memory channel to
assign the name.
To assign a name to a home channel, recall the de-
sired home channel.
3. Press and hold the [DISP] key, then touch [MEMORY].
4. Touch [3 MEMORY NAME].
• Use the numeric keys or the DIAL knob to input the
characters.
• Touch
to move the cursor to the right in the text
input area.
• See “Text input screen” on page 89 to input a
memory tag.
• When a memory tagged Memory channel is recalled,
both the memory tag and the frequency will be displayed.
(The Memory tag is only displayed on the operating
band.)
• Touch and hold the frequency display of the operating
band to switch between memory tag display and normal
frequency display of all memory channels.
YAESU
For additional details on the following functions, refer to the Advanced Manual which may
be downloaded from the Yaesu website.
Memory Channel List
All memory channels can be displayed and recalled from the list.
Split Memory
Two different frequencies, one for receive and another for transmit, can be registered to
a memory channel.
Using Memory Bank
The transceiver provides 24 memory banks that allow sorting and registering the chan-
nels in convenient groups.
To Next Page
Loading...
Need help?
General
