80
10 Setting the Operation of the MONI/T-CALL Key
Set how the transceiver functions when the MONI/T-CALL key is pressed.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [10 MONI/T-CALL].
3. Rotate the DIAL knob to select the desired setting.
MONI Monitors frequencies.
T-CALL Functions as the tone call.
Remark The default setting: NONI (USA version), T-CALL (European/Asian version)
11 Turning the Transceiver ON/OFF at the Specified Time
Timer Function
You can turn the transceiver to ON or OFF at the specified time. Before using this func-
tion, adjust the clock referring to “19 Setting Clock Time” on page 82.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Rotate the DIAL, then touch [11 TIMER].
3. Rotate the DIAL knob to select the desired option.
POWER ON Turns the transceiver ON at the specified time.
POWER OFF Turns the transceiver OFF at the specified time.
4. Press the [DISP] key.
5. Rotate the DIAL knob to set the hour, then press the [DISP] key.
6. Rotate the DIAL knob to set the minute, then press the [DISP] key.
7. Touch [TIMER ON] or [TIMER OFF] to set the timer function to ON or OFF.
8. Touch [TIMER OFF] to deactivate the timer function.
Remark The default setting:
£
(TIMER OFF)
12 Password Function
A 4-digit password may be entered to prevent a third party from using the transceiver
without permission. Once a password is set, the transceiver cannot be used unless the
valid password is entered.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Rotate the DIAL, then touch [12 PASSWORD].
3. Rotate the DIAL knob to select [ON].
ON Set the password.
OFF Does not set the password.
Remark The default setting: OFF
4. Press the [DISP] key.
5. Use the numeric keypad to input the desired 4 letters using 0 to 9, A to D, * or #.
6. Press the [DISP] key.
7. The registered 4 letters appear.
• To deactivate the password function, select [OFF] in step 3, then press PTT switch.
• When the on-timer function is activated, the password function is disabled.
To Next Page
Loading...
Need help?
General
