Yaesu FT3DE User Manual

70
Set Mode: MEMORY Menu Operations
1 Setting Memory Bank Link
You can link multiple registered memory banks so that you can recall frequently used
memory banks immediately.
1. Press and hold the [DISP] key, and then touch [MEMORY].
2. Touch [1 BANK LINK].
3. Rotate the DIAL knob to select the memory bank you want to link, then press the
[DISP] key.
The checkbox is checked.
4. Repeat step 3 to link the memory banks one by one from BANK 1 to BANK 24.
2 Assigning Name to Memory Bank
By selecting [2 BANK NAME], you can assign a name to each memory bank using up to
16 characters.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
3 Assigning Name to Memory Channel
By selecting [3 MEMORY NAME], you can assign a name such as a call sign and broad-
cast station name to each memory channel and home channel.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
4 Memory Channel Protect Function
A memory channel may be protected so that a new frequency or memory channel tag
name cannot be registered to it.
1. Press and hold the [DISP] key, and then touch [MEMORY].
2. Touch [4 MEMORY PROTECT].
3. Rotate the DIAL knob to select the desired setting.
OFF Allows registering to registering to memory channels.
ON Prohibits registering to memory channels.
Remark The default setting: OFF
5 Setting Memory Skip Function
By selecting [5 MEMORY SKIP], you can set the scan method for scanning memory
channels.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.

Yaesu FT3DE Specifications

General

Brand	Yaesu
Model	FT3DE
Category	Transceiver
Language	English