Yaesu FT3DE - Managing Bluetooth Devices; Connecting Another Bluetooth Headset

44
Convenience Features
Bluetooth
®
Operation
The FT3DR/DE has built-in Bluetooth
®
functionality. Hands-free operation is possible us-
ing the optional Bluetooth
®
headset (SSM-BT10) or a commercially available Bluetooth
®
headset.
The operation of all commercially available Bluetooth
®
headsets cannot be guaranteed.
Pairing the Bluetooth
®
Headset
When using the Bluetooth
®
Headset for the first time, the Bluetooth Headset and the
FT3DR/DE must be paired.
This step is only necessary when first connecting the headset.
1. To start the Bluetooth
®
headset in pairing mode.
SSM-BT10: Press and hold the Multi Function Button
for 3 seconds, until the SSM-BT10 LED
blinks red/blue alternately.
2. Press and hold the [DISP] key, and then touch
[OPTION].
3. Touch [2 Bluetooth].
4. Touch [SEARCH].
“Searching” is displayed and the model name of the
found Bluetooth device is displayed in the list.
5. Rotate the DIAL knob to select the desired Bluetooth
device.
6. Touch [CONNECT].
SSM-BT10
7. When pairing is complete, the connected Bluetooth
headset model name is displayed.
SSM-BT10: LED blinks blue.
8. Press the PTT switch to return to the normal operation.
• While connected to a Bluetooth headset, the “
” icon lights up on the FT3DR/DE
screen, and the received audio and operation beep will be heard from the Blue-
tooth headset.
z
Disable the Bluetooth function
To cancel Bluetooth operation, just repeat the above procedures, selecting “OFF” in
step 4 above.