Yamaha 2007 FZ6-NA User Manual

SIGNALING SYSTEM
8-22
NG→
OK↓
The tail/brake light fails to come on.
NG→
OK↓
NG→
OK↓
NG→
OK↓
NG→
OK↓
The turn signal light, turn signal indicator light or both fail to blink.
NG→
OK↓
NG→
OK↓
3. Check the entire signaling sys-
tem’s wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
Properly connect or repair the signal-
ing system’s wiring.
This circuit is OK.
1. Check the tail/brake light bulb and
socket.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
8-112.
Replace the tail/brake light bulb,
socket or both.
2. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
Replace the front brake light switch.
3. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
Replace the rear brake light switch.
4. Check the entire signaling sys-
tem’s wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
Properly connect or repair the signal-
ing system’s wiring.
This circuit is OK.
1. Check the turn signal indicator
light bulb and socket.
Refer to "CHECKING THE LEDS"
on page 8-113.
Replace the turn signal indicator light
bulb, socket or both.
2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
Replace the left handlebar switch.

Yamaha 2007 FZ6-NA Specifications

General

Brand	Yamaha
Model	2007 FZ6-NA
Category	Motorcycle
Language	English