To Next Page

To Previous Page

TIGHTENING TORQUES

2-20

EAS20350

CHASSIS TIGHTENING TORQUES

Item

Thread

size

Q’ty Tightening torque Remarks

Upper bracket pinch bolt M8 2 30 Nm (3.0 m·kg, 22 ft·lb)

Steering stem nut M22 1 110 Nm (11 m·kg, 80 ft·lb)

Upper bracket and upper handle-

bar holder

M8 4 23 Nm (2.3 m·kg, 17 ft·lb)

Lower bracket pinch bolt – 2 30 Nm (3.0 m·kg, 22 ft·lb)

Lower ring nut M25 1 18 Nm (1.8 m·kg, 13 ft·lb)

See

NOTE

Front fork cap bolt M35 2 24 Nm (2.4 m·kg, 17 ft·lb)

Damper rod assembly bolt M10 2 23 Nm (2.3 m·kg, 17 ft·lb)

Front wheel axle pinch bolt M8 1 23 Nm (2.3 m·kg, 17 ft·lb)

Front brake master cylinder bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)

Front brake master cylinder cap

screw

M4 2 2 Nm (0.2 m·kg, 1.4 ft·lb)

Front brake hose union blot M10 2 30 Nm (3.0 m·kg, 22 ft·lb)

Front brake hose holder and front

fork

M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)

Front cowling stay and frame M8 2 33 Nm (3.3 m·kg, 24 ft·lb)

Front cowling bracket and frame M6 2 7 Nm (0.7 m·kg, 5.0 ft·lb)

Front fender and front fork M6 2 6 Nm (0.6 m·kg, 4.3 ft·lb)

Clutch lever holder pinch bolt M6 1 11 Nm (1.1 m·kg, 8.0 ft·lb)

Engine mount bolts (left of front

side)