Instruments and indicators
55
soon if the low battery voltage-alert device
has activated. For charging the battery, con-
sult your Yamaha dealer.
EMU41032
Command Link speed & fuel
meter
The speed & fuel meter unit shows the boat
speed and has the functions of fuel meter, to-
tal fuel consumption display, fuel economy
display, fuel flow display, and system voltage
display. The chosen display is selected using
the “” (set) and “” (mode) buttons as
described in this section. If the speed sensor
is installed, the unit can also show the trip dis-
play. However, even if the speed sensor is not
installed, the trip display can be shown by
connecting an optional sensor to the unit. In
addition, if optional sensors are connected to
the unit, water surface temperature display,
depth display, and clock will also be available.
For the optional sensors, consult your
Yamaha dealer.
The speed & fuel meter unit is available in
round and square types. Check your speed &
fuel meter unit type.
After the main switch is first turned to the “”
(on) position, all of the displays come on as a
test. After a few seconds, the unit will change
to normal operation.
For more information, see the operation man-
ual for the meters.
ZMU05427
ZMU05428
1. Set button
2. Mode button
1. Speedometer
2. Fuel meter
3. Multifunction display
2
1
ZMU05432
1
2
3
ZMU05433
U63P1DE0.book Page 55 Tuesday, March 29, 2011 7:15 PM
©2019 Yamaha Motor Corporation, U.S.A.