Yamaha F115 User Manual

Maintenance
91
EMU34451
Maintenance chart 2
EMU28911
T
IP:
When using lead or high-sulfur gasoline, inspecting valve clearance may be required more fre-
quently than every 500 hours.
Main switch/stop
switch/choke switch
Inspection or replace-
ment as necessary
Wire harness connec-
tions/wire coupler con-
nections
Inspection or replace-
ment as necessary
(Yamaha) Meter/gauge Inspection
Item Actions
Every
1000 hours
Exhaust guide/exhaust
manifold
Inspection or replace-
ment as necessary
Timing belt Replacement
Item Actions
Initial Every
20 hours
(3 months)
100 hours
(1 year)
300 hours
(3 years)
500 hours
(5 years)
U63P1DE0.book Page 91 Tuesday, March 29, 2011 7:15 PM
©2019 Yamaha Motor Corporation, U.S.A.

Yamaha F115 Specifications

General

Displacement	1832cc
Prop Shaft Horsepower	115 hp
Alternator Output	35 Amp
Gear Ratio	2.15:1
Starting System	Electric
Fuel Recommendation	Regular Unleaded (Minimum Pump Octane 87)
Oil Recommendation	Yamalube 4M
Exhaust	Through Propeller
Lubrication	Wet Sump
Steering	Remote
Cooling System	Water Cooled
Bore x Stroke	81.0 x 88.9 mm
Full Throttle RPM Range	5300-6300 rpm
Fuel Induction System	EFI (Electronic Fuel Injection)
Ignition System	TCI (Transistor Controlled Ignition)
Weight	377 lbs
Cooling	Water Cooled
Shaft Length	L = 20 inch, X = 25 inch