CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 100
Speaker (Manual Setup)
Configures the speaker settings manually.
• Default settings are underlined.
■ Power Amp Assign
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the presence speakers, Zone2 speakers, or bi-amp connection.
Settings
■ Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
Selects the size of the front speakers.
Settings
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Selects whether or not a center speaker is connected and its size.
Settings
Selects whether or not surround speakers are connected and their sizes.
Settings
Basic
Select this option when you use a normal speaker system (not using
Zone2 speakers or a bi-amp connection).
7ch +1ZONE
Select this option when you use Zone2 speakers (p.79) in addition to
the speaker system in the main zone.
5ch BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.21).
Front
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Bass Cross Over”).
Center
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
Small
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
Surround
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
