CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 99
Network
Network Connection Selects the network connection method. 107
IP Address Configures the network parameters (such as IP address). 107
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 108
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 108
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 109
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the TV screen. 109
Zone2 Set
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 110
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 110
Zone Rename Changes the zone name (for Zone2) displayed on the TV screen. 110
Party Mode Set
(RX-V777 only)
Enables/disables switching to the party mode.
110
Function
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 110
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 110
Wallpaper Selects the image to be used as wallpaper on the TV. 110
Trigger Output
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 111
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 111
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 111
Memory Guard Prevents accidental changes to the settings. 112
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 112
ECO Mode Enables/disables the eco mode (power saving mode). 113
Language Select an on-screen menu language. 113
Menu Item Function Page
To Next Page
Loading...
Need help?
General
Weight and Dimensions
