Yamaha RX-V677 User Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 107
■ Audio Output
Selects a device to output audio.
• This setting (except for “HDMI OUT2” [RX-V777 only]) is available only when “HDMI Control” is set to “Off”.
Enables/disables the audio output from the speakers connected to the unit.
Settings
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
■ Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On”, you can use the input selection
keys (HDMI 1–5, V-AUX) to select an HDMI input even when the unit is in standby mode
(the standby indicator on the unit blinks).
Settings
• This setting is available only when “HDMI Control” is set to “Off”.
Network
Configures the network settings.
■ Network Connection
Selects the network connection method.
Settings
■ IP Address
Configures the network parameters (such as IP address).
Select whether to use a DHCP server.
Settings
Amp
Off Disables the audio output from the speakers.
On
Enables the audio output from the speakers.
HDMI OUT1, HDMI OUT2 (RX-V777 only)
HDMI OUT (RX-V677 only)
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Off
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
Wired
Select this option when you want to connect the unit to a network with
a commercially-available network cable (p.30)
Wireless (Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point). For details on settings, see
“Connecting the unit to a wireless network” (p.43).
Wireless Direct
Select this option when you want to connect a mobile device to the
unit directly. For details on settings, see “Connecting a mobile device
to the unit directly (Wireless Direct)” (p.48).
DHCP
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).

Yamaha RX-V677 Specifications

General

Receiver type	Surround
Audio output channels	7.2 channels
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	125 W
Power output per channel (1KHz@8 Ohm)	105 W
Power output per channel (20-20KHz@8 Ohm)	90 W
HDMI in	6
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Volume control	Rotary
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, JPN, RUS
Power consumption (standby)	0.15 W

Weight and Dimensions

Depth	365 mm
Width	435 mm
Height	171 mm
Weight	10025 g