22
●
Playback
●
Filter Play
This feature applies a filter to samples and songs, with the ribbon providing dy-
namic control of the filter cutoff frequency. You select the filter type and reso-
nance directly from within the filter-play function: the SU10 will remember the
settings when you terminate filter play, then restore them when you return. The
selected settings apply to all samples and songs.
Selecting filter play
1. With the SU10 in PLAY mode, press [SHIFT]+[FILTER].
The LCD indicates the current filter type and resonance. The lower left of the
LCD shows a graphic image of the resulting filter effect.
Filter type Resonance
l: LPF f: Flat
b: BPF w: Weak
h: HPF s: Strong
Current ribbon value
Effect-play indicator
Filter type
"b" = Band-pass filter
Filter image
"Weak" resonance
2. You can now use the ribbon to control the filter. Try playing some samples or
songs and running your finger over the ribbon. Notice that the LCD displays
the ribbon value in real time.
The effect you get depends on the current filter settings. If you wish to change
the settings, proceed as described below.
3. To return to normal PLAY mode, press [EXIT].
To Next Page
Loading...
Need help?
General
