●
Error and Warning Messages
●
71
11
Error and Warning
Messages
This section describes the causes and responses for each of the SU10 error and
warning message.
Warning messages
Locked Data!
Locked Bank!
Locked Song!
[Cause]
You attempted to execute an operation that would delete data from a pro-
tected area.
[Response]
You can switch off locks using the LOCK utility. (See page 64.)
Be careful to avoid accidental deletion of data.
Change Grd! (Change Grade)
[Cause]
You attempted to select a PLAY feature that is not available at the currently
selected sampling grade.
[Response]
Go to the Recording Setup utility and reduce the Grade setting.
Memory Full!
[Cause]
Song/sample memory became full during recording of a sample or song. (All
data recorded prior to the appearance of this message remains registered in
memory.)
[Response]
If you need to record a longer sample, try deleting or compacting existing
samples, and/or reducing the sampling grade or pitch.
If you need to record a longer song, you can increase available memory by
deleting one or more existing songs.
Battry Low!
[Cause]
Batteries are low.
[Response]
Replace the batteries.
To Next Page
Loading...
Need help?
General
