EasyManuals Logo

Yamaha SU10 User Manual

Yamaha SU10
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
UTILITY Mode
63
2. The SU10 executes the dump. If the sample is monaural, the SU10 displays
the message Sending M to indicate that transmission is in progress.
If the sample is stereo, the SU10 sends the left part first, while displaying the
message Sending L. When finished, it asks whether to send the right part
(Send R OK?). Press [ENTER] to proceed, or [EXIT] to end.
You can abort an ongoing dump at any time by pressing [EXIT]. The LCD will briefly display the
Canceled message, then offer to dump the next sample.
3. Upon completing the dump, the LCD briefly displays the Complete mes-
sage, then offers to dump the next sample. You can (
a
) press [ENTER] to dump
the indicated sample; (
b
) change the sample selection; or (
c
) press [EXIT] to
return to the UTILITY menu.
The SU10 sends a sample identification along with the data. If the pad is monaural, the ID is
equal to the pad number: ID 1 identifies pad A1, ID 2 identifies pad A2, ID 48 identifies pad
D12. If the sample is stereo, the SU10 dumps it as two samples, using the pad number for the
left sample’s ID, and 50 plus the pad number for the right sample’s ID. If you dump stereo
sample A3, for example, the left sample gets ID 3, while the right sample gets ID 53.
The SU10 always transmits the sample in forward direction (from start of wave to end of
wave), regardless of the sample’s loop-mode setting.
Not all receiving devices will be able to reproduce the sample exactly as it sounds on the SU10.
In particular, loop operation and replay pitch may be slightly different.
Song Deletion [Song]
You use this utility to delete selected songs. When you enter this utility, the SU10
displays a message such as the following, offering to delete the currently selected
song.
Delete
Sg#1?
You have three choices:
1. Press [ENTER] to delete the indicated song.
2. Select a different song by pressing [+1] or [–1], or by holding down [SHIFT] and
pressing the appropriate SONG button. Then press [ENTER] to delete.
3. Press [EXIT] to return to the UTILITY menu.
The SU10 does not return a confirmation query prior to deleting the song. Be careful to avoid
accidental erasure.
After deleting a song, the SU10 offers to delete the next nonempty song (if any). Again, be
careful to avoid accidental deletion.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha SU10 and is the answer not in the manual?

Yamaha SU10 Specifications

General IconGeneral
BrandYamaha
ModelSU10
CategoryRecording Equipment
LanguageEnglish

Related product manuals