Yamaha Waverunner VXS VX1800 User Manual

7-31
Starting system
Starting system
Fuse check
1. Check the fuse for continuity. Replace if
there is no continuity.
Handlebar switch (left) check
1. Disconnect the handlebar switch (left) cou-
pler (white coupler).
2. Check the engine start switch for continui-
ty. Replace the handlebar switch (left) if
out of specification.
3. Connect the handlebar switch (left) cou-
pler (white coupler).
4. Disconnect the handlebar switch (left) cou-
pler (black coupler).
5. Check the engine stop switch for continui-
ty. Replace the handlebar switch (left) if
out of specification.
6. Connect the handlebar switch (left) cou-
pler (black coupler).
Main relay check
1. Remove the fuse box cover and main relay
“1”.
2. Connect the positive battery lead to the
terminal “a”, and the negative battery lead
to the terminal “b”, and then check for con-
tinuity between the terminals “c” and “d”.
Replace the relay if there is no continuity.
Do not reverse the battery leads. Other-
wise, the relay may be seriously damaged.
Engine start switch continuity
Clip “1”
Engine start
switch “2”
Red (R)–
Brown (Br)
Installed “A”
Free No continuity
Pushed Continuity
Removed
“B”
Free No continuity
Pushed No continuity
R
Br
1
2
A
B
2
Engine stop switch continuity
Clip “1”
Engine stop
switch “2”
White (W)–
Black (B)
Installed “A”
Free No continuity
Pushed Continuity
Removed
“B”
Free Continuity
Pushed Continuity
WB
2
2
1
A
B
1

Yamaha Waverunner VXS VX1800 Specifications

General

Brand	Yamaha
Model	Waverunner VXS VX1800
Category	Boat
Language	English